10 Pronged Afro Comb SPC86: Detangling Curls Step by Step
By Kent Brushes | The World's Finest Hairbrushes & Combs | Published: 2026-11-02
Category: How-to Guides
Learn a step-by-step curl detangling routine using the Kent 10 Pronged Afro Comb SPC86. Work through knots gently without scratching your scalp or breaking natural hair.
Quick answer
Detangle curly hair with the Kent 10 Pronged Afro Comb SPC86 by working in small, damp sections from ends to roots. Use the wide tooth afro comb slowly and never force it through a knot.
Why the SPC86 works for natural curls
The SPC86 is made from a special hard rubber material that is static and heat-resistant, so it won't create flyaways or feel harsh during detangling. Its rounded teeth glide through thick, curly hair without scratching the scalp, which matters when you're working through multiple sections. The 10-prong spacing is wide enough to separate curls without pulling them apart, making it a practical afro comb for natural hair.
When to detangle wet versus dry
Wet detangling with conditioner provides the most slip and is ideal for tight curls and coils. Dry detangling works for looser textures or quick refreshes, but it requires more patience and smaller sections. The SPC86 is suitable for both wet and dry hair, so you can adapt the routine to your hair's needs. If your hair is prone to shrinkage or single-strand knots, always start on damp hair.
Step-by-step curl detangling routine
- Start with damp, conditioned hair: Mist your hair with water and apply a slippery conditioner or leave-in. Divide hair into four to six sections using clips. Work on one section at a time, keeping the rest clipped away. Skipping this step and combing dry, unconditioned hair is the most common cause of breakage.
- Hold the section mid-length: Grasp the section firmly between your fingers, about halfway down. This prevents the comb from pulling on your scalp as you work through tangles. If you feel pulling at the root, you're holding too close to the scalp.
- Comb from ends to roots: Insert the SPC86 near the ends of the section and comb downward gently. Once the ends are smooth, move the comb up an inch and repeat. Continue until you can comb from root to tip without resistance. Starting at the roots immediately causes knots to bunch up and break hair.
- Use short, gentle strokes: Let the rounded teeth do the work. Use short strokes and light pressure, especially over knots. If you meet resistance, switch to your fingers to loosen the knot before resuming with the comb. Forcing the comb through a knot is the second most common mistake—patience preserves length.
- Work section by section: Finish one section completely before moving to the next. Twist or braid each detangled section to keep it smooth and out of the way. Detangling the whole head at once leads to missed knots and unnecessary pulling.
- Rinse and style as usual: Once all sections are detangled, rinse thoroughly and proceed with your normal styling routine. The SPC86 can also be used to add volume at the roots on wet or dry hair. Clean the comb after each use to remove product buildup and keep teeth gliding smoothly.
Product facts
- 10 Pronged Afro Comb - SPC86: Made from special hard rubber that is static and heat-resistant. Reduces static and withstands heat, so the comb stays effective during blow-drying or warm water rinses.
10 Pronged Afro Comb - SPC86 - 10 Pronged Afro Comb - SPC86: Rounded teeth ensure a smooth, comfortable action without scratching or damaging hair or scalp. You can detangle closer to the scalp without fear of scrapes, which is especially helpful for tender-headed curlies.
- 10 Pronged Afro Comb - SPC86: Suitable for backcombing or adding volume to wet or dry thick hair. Beyond detangling, you can use it to lift roots and create volume without switching tools.
